16.11.2018продам
UR7HBQ
Телефон: +380964340280 (есть Viber) OLX: http://olx. ua/list/user/DfwJ/ SkyLots: https://skylots. org/orlexy Telegram: https://t. me/UR7HBQ

Показать все объявления этого автора

Airspy HF+ Plus SDR приемник

Под заказ. Новый. 7000грн

Если есть вопросы - лучше пишите на Viber или в Telegram UR7HBQ или на OLX

Также под заказ могу привезти AirSpy R2 - отличный приемник в диапазоне от 24 до 1700МГц.

Technical specifications

HF coverage between 9 kHz .. 31 MHz
VHF coverage between 60 .. 260 MHz
-141.0 dBm (0.02 µV / 50 ohms) MDS Typ. at 500Hz bandwidth in HF
-141.5 dBm MDS Typ. at 500Hz bandwidth in FM Broadcast Band (60 – 108 MHz)
-139.5 dBm MDS Typ. at 500Hz bandwidth in VHF Aviation Band (118 – 136 MHz)
-139 dBm MDS Typ. at 500Hz bandwidth in VHF Commercial Band (136 – 174 MHz)
-138 dBm MDS Typ. at 500Hz bandwidth in the upper VHF Band (> 174 MHz)
+26 dBm IIP3 on HF at maximum gain
+13 dBm IIP3 on VHF at maximum gain
110 dB blocking dynamic range in HF
95 dB blocking dynamic range in VHF
120 dB Image Rejection (software)
Up to 660 kHz alias and image free output for 768 ksps IQ
18 bit Digital Down Converter (DDC)
+10 dBm Maximum RF input
0.5 ppm high precision, low phase noise clock
Very low phase noise PLL (-110 dBc/Hz 1kHz separation 100 MHz)
2 x High Dynamic Range Sigma Delta ADCs up to 36 MSPS
No Silicon RF switch to introduce IMD in the HF path
Routable RF inputs
Wide Band RF filter bank
Tracking RF filters
Sharp IF filters with 0.1 dB ripple
Smart AGC with real time optimization of the gain distribution
All RF inputs are matched to 50 ohms
4 x Programmable GPIO’s
No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
Industrial Operating Temperature: -45°C to 85°C

Performance Plots

Airspy HF+ 500 Hz HF MDS
Airspy HF+ 500 Hz Broadcast FM MDS
Typical Applications

High Performance Networked HF/VHF Radio
Ham Radio (HF + 2m)
Short Wave Listening (SWL)
AM DX
FM DX
VHF-L TV DX
Remote Telemetry Radio Receiver
Low Bands IoT

Supported Operating Systems

Windows Vista, 7, 8, 8.1 and 10
Linux
*BSD
OSX

Supported Hardware

Intel compatible PC
Raspberry Pi 2 and 3
Odroid C1, C2 and XU4
Many other Single Board Computers (SBC)

Minimum hardware requirements

1GHz Pentium or ARM
1GB of RAM (to run your own OS, HF+ barely needs 1MB of memory)
High speed USB 2.0 controller
сохранить ссылку  
комментарии:0     
Чтобы написать комментарий, вам надо зайти под своим паролем
x

восстановить пароль

x

Если вы забыли пароль, введите свой E-mail и нажмите кнопку